Description Of The Terminals And Jumper By System Type; Pedestrian Gate Electric Lock Activation Time Setting; Speaker Sound Level Adjustment; Installation Completion - Urmet mini note + 1722 Serie Manual De Instrucciones

9.1.

DESCRIPTION OF THE TERMINALS AND JUMPER BY SYSTEM TYPE

]
AP1 Hall button terminals for pedestrian electric lock (OP4)
]
AP2 Hall button terminals for garage gate lock (OP5) - hall button contacts with current greater than 1 A @ 30 Vdc
}
NO
Garage gate opener operation dry contact (OP6) - maximum switch 1 A @ 30 Vdc
C
}
L
BUS line
L
}
SE2
Pedestrian electric lock operation (OP1) - maximum switch 12 Vac 15 VA
SE1
One-household system
Two-household system
9.2.

PEDESTRIAN GATE ELECTRIC LOCK ACTIVATION TIME SETTING

The pedestrian gate electric lock activation time can be adjusted using the dip switches present in the calling station:
9.3.

SPEAKER SOUND LEVEL ADJUSTMENT

Volumes are calibrated by default so not to require adjustments in most cases.
Use a screwdriver to adjust the speaker volume, if required.
9.4.

INSTALLATION COMPLETION

To complete the installation, close the panel using the metal lid and remove the protective fi lms as shown in the following drawings.
24
JP1
JP1
do not change
the position
of this trimmer
A7
A4
DS1722-098A