FEIN Power Tools FSC1.7 Serie Manual Del Usuario página 16

OBJ_BUCH-0000000208-005.book Page 16 Wednesday, January 23, 2019 10:07 AM
en
16
Mounting application tools
(FSC1.7Q (**)) (figure 4).
Release the clamping lever and tilt it to the
stop.
Pull out the fastening element.
Clean the tool holder, the application tool and
the fastening element.
Insert the application tool accurately into the
star-shaped tool holder. Pay attention that the
application tool is mounted flush.
Fig. 4
Fastening element
2.
Clamping lever
180°
1.
3.
4.
1.
180°
2.
CAUTION
edges, use cover 3 21 74 011 00 0 to protect
yourself against hand/arm injuries.
CAUTION
the clamping lever.
CAUTION
running. Otherwise there is danger of injury.
4.
3.
5.
8.
Cover
When changing application
tools with sharp cutting
Firmly press in the fastening
element to the stop. Then lock
Do not actuate the clamping
lever while the power tool is
Fastening element
Application tool
180°
6.
Fastening element
Application tool
5.
Cover
180°
7.