Sony SHAKE-X30 Manual De Instrucciones página 46

If there is equipment that
• •
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
Turn down the volume of the
• •
connected BLUETOOTH device.
Party Chain
Party Chain function cannot be
activated.
Check the connections
• •
(page 34).
Make sure the audio cables are
• •
connected correctly.
"PARTY CHAIN" is flashing on the
display.
You cannot select AUDIO IN
• •
function if you make connection
 (page 34) during Party Chain
function. Select other function
(page 36).
Press PARTY CHAIN on the unit.
• •
Restart the system.
• •
Party Chain function does not
work properly.
Turn off the system. Then, turn it
• •
back on again to activate the Party
Chain function.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press  to turn on the system.
46
US
3
Hold down DJ OFF and  for
about 3 seconds.
"RESET" appears on the display.
After the reset completes, the
system automatically reboots. Press
 to turn on the system.
All user-configured settings, such as
preset radio stations are reset to
factory default setting.
Messages
One of the following messages may
appear or flash on the display during
operation.
CANNOT PLAY
A disc that cannot be played back
was inserted.
DATA ERROR
The file is created in unsupported
• •
format.
The file extensions does not match
• •
the file format.
DEVICE ERROR
The USB device could not be
recognized or an unknown device is
connected.
DEVICE FULL
The memory of the USB device is
full.
ERASE ERROR
Erase of audio files or folders on the
USB device failed.
FATAL ERROR
The USB device was removed during
transfer or erase operation, and may
have been damaged.
FOLDER FULL
You cannot transfer onto the USB
device because the number of
folders has reached its maximum.