Urrea 260A Manual De Usuario Y Garantía página 5

CAUTIONS
• Do not exceded the max capacity.
• Use additional safety suport.
• Use chocks if appropriate.
• Only be used on a solid level surface.
• Use oil HL or HM.
• Repair by qualifiaed persons.
1,3t
WARNINGS
• Read these safety instructions carefully
in addition to the instructions for use,
operation and maintenance. Keep this
instructions sheet in an easy to find place
as you may need to use it again.
• This jack has been designed for use in
the elevation of cars and lorries. Any
other application, beyond the conditions
established for use of this jack will be
considered inappropriate.
• Handle the jack correctly and ensure that
all parts are in good condition prior to its
use.
• Only authorised persons should operate
the jack having read carefully and
understood the contents of this manual.
• Do not modify the jack in any way.
• Non-compliance with these rules may
result in injury or damage to the user,
the jack or the vehicle to be lifted. The
manufacturer accepts no responsibility
for the improper use of the jack.
OPERATION
Raising vehicle
1. Make sure the jack and vehicle are on a
hand level surface.
2. Always set the vehicle parking brake and
block the wheels.
3. Consult the vehicle owners manual to
ascertain the location of jack points and
position the jack beneath the prescribed
lift point.
4. Turn the release valve clockwise to the
closed position. "Do not over tighten".
5. To raise the vehicle to designed height,
place the handle into the socket and
pump up and down.
6. Place jack stands beneath the vehicle at
locations recommended by the vehicle
manufactured. Do not attempt to put
jack stand without jack stands. Jacks are
not designed to maintain heavy loads for
long periods of time. Do not get under
the vehicle simultaneously under both
ends of vehicle or under one side of
vehicle.
7. Turn release valve slowly counterclockwise
to lower load onto jack stands.
Lowering vehicle
1. Turn the release valve clockwise to the
closed position.
2. Pump the handle to lift vehicle off jacks
stands.
3. Remove the jack stands. Don not get
under or let anyone else under the vehicle
while lowering.
4. Turn the release
counterclockwise to lower the vehicle
onto the ground.
E N G L I S H
valve slowly
5