Space Required; Electrical Connections - Brandt BFK101YBW Manual De Instrucciones

Space required

 Choose a location that is not directly to sunlight.
 Choose a location with enough space so that the refrigerator can open easily.
 Allow a safety distance to the right (C1), to the left (C1) and to the rear (D) of the appliance
when installing it. This allows optimising product performance, reduces your power
consumption and therefore limits your electricity bill (see diagram below).
 Make sure that air can freely circulate behind the appliance.
Model
BFK101YBW
BFK151YSW/YSS
BFK201YSW/YSS
BFK251YSW/YSS
BFK301YSW
BFK381YSW

Note that this appliance is not designed for built-in installation.

Electrical connections

Warning!
the plug must remain easy to access after installation.
 The electric connections must meet the applicable standards and be capable of withstanding
the maximum power shown on the ID plate.
 The power plug must be easily accessible and out of the reach of children.
 For your safety this appliance must be earthed. If the power plug is not earthed, consult a
qualified electrician to connect your appliance in line with applicable regulations.
 Do not use extensions, adapters or multiple plugs.
 Do not place multiple plugs or portable power supply units behind the appliance.
The manufacturer declines all liability if the above-mentioned safety precautions are not complied
with. If in doubt, refer to your reseller.
Space Required In Use
W1 / mm
(Product Width) (Product Depth)
545
705
905
954
1120
1300
Remark: D1 doesn't contain the external handel size.
It must be possible to unplug the appliance from the mains power, so
D1 / mm H1 / mm
(Minimum Height)
545 1450
545 1450
545 1450
616 1500
700 1600
700 1600
C1 / mm
(Minimum Clearance)
100
100
100
100
100
100