CA R E A N D C L E A N I N G O F T H E R A N G E
OVEN RACKS AND DRAWER RACKS
If your oven is equipped with nickel oven racks,
remove them from the oven before beginning the self-
clean cycle.
Roast rack (some models)
Split rack (some models)
OVEN LIGHT REPLACEMENT
The oven light is a standard 40-watt appliance bulb. It
will come on when the oven door is open. When the
oven door is closed, thouch OVEN LIGHT to turn ON
or OFF. It will not work during the Self-Clean cycle.
WARNING:
• Before replacing your oven light bulb,
DISCONNECT the electrical power to the range
at the main fuse or circuit breaker panel.
- Failure to do so can result in severe personal
injury,death or electrical shock.
• Make sure oven and bulb are cool completely.
To clean the oven racks, use an abrasive cleanser.
After cleaning, rinse the racks with clean water and
dry with a clean cloth. If the racks ever become hard
to slide, wipe the rack edges or oven rack supports
with vegetable oil.
Heavy duty (standard) rack
Warming drawer rack (some models)
TO REPLACE
• Make sure oven and bulb are cool.
Unplug range or disconnect power.
Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
Turn bulb counterclockwise to remove from
socket.
Replace bulb and bulb cover by turning clockwise.
Plug in range or reconnect power.
43