Finishing The Installation - gaviota KYMA Manual De Instalación

(All the example assembly images are a Type 4 configuration with motor to the right).
Step 63. (Common)
Once all the frontal profiles are regulated, take off the arm safety bands
and close the box. The wall/ceiling supports must now be installed at the
client's home. The arms have a heavy spring. Be careful during this step.

Finishing the Installation:

Step 64. (Common)
Tighten the screws to the supports once the desired inclination is set, with a
no. 8 Allen key and a no. 17 spanner.
Step 65. (Common)
Place the remaining covers on the wall supports. Clamp and studs. Adjust the
motor's limit switches before placing the box's covers.
All dimensions in mm, unless otherwise stated.
Step 66. (Common)
KÝMA
Assemble and attach the box's covers
with a DIN7982 2.9x9.5 screw and a
Phillips screwdriver.
65