METREL MD 115 Instrucciones De Empleo página 19

Operation
Thank you for choosing a Metrel
| Non-contact voltage tester from 12 V AC
| High performance LED flashlight
| Vibrates if voltage is detected.
Non-contact voltage test
®
The Metrel
ing wires carrying live voltages using its
built-in circuits in its tip.
If a voltage of 110 V AC or more is detect-
ed, the white cap will glow red (1a) and the
device vibrates. To detect voltages below
110 V AC, switch the flashlight on using
the switch (1b). Now voltages from 12 V
AC can be detected.
A flowing current is not required!
Check the voltage tester before use against a known
voltage supply (e.g. a power socket) to ensure that it is
working correctly.
When using the Tester, if tip does not glow, voltage could still be
present. The Tester indicates active voltage in the presence of elec-
trostatic fields of sufficient strength generated from the source
(MAINS) voltage. If the field strength is low, the Tester may not pro-
®
Metrel MD 115
MD 115 is capable of detect-
®
MD 115.
Operation
19