Publicidad
Idiomas disponibles
Idiomas disponibles
Symbol
III
Power tool designation
The cordless circular saw is designed for cutting
wooden piece-parts� The power tool enables vertical
and inclined cuts as well as cutting depth adjustment�
Using special saw blades enables you to cut plastic
blanks�
Power tool components
1 Vacuum cleaner adapter *
2 Battery *
3 Battery lock *
4 Cutting depth scale
5 Guard cover
6 On / off switch
7 Lock-off button
8 Spindle lock
9 LED lamp
10 Body tilt angle scale
11 Fixing nut of the body inclination angle scale
12 Additional handle
13 Sliding guard cover lever
Meaning
Unlocked�
Prohibited�
Protection class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Useful information�
Wear protective gloves�
During operation, remove
the accumulated dust�
Do not dispose of the power
tool in a domestic waste
container�
14 Saw blade *
15 Saw blade fixing bolt
16 External flange
17 Sliding guard cover
18 Cutting mark at 0° body inclination angle
19 Cutting mark at 45° body inclination angle
20 Base plate
21 Fixing screw for parallel guide
22 Ventilation slots
23 Indicator "High-torque mode"
24 Fixing lever
25 Control button of the state of battery charge *
26 Indicators of the state of battery charge *
27 Allen key *
28 Parallel guide *
29 Charger *
30 Screw *
31 Internal flange
32 Spindle
33 Body vertical position adjustment bolt
34 Label *
35 Indicator (red) *
36 Indicator (green) *
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before carrying out any works on the power tool
remove the battery 2.
Do not draw up the fastening elements
too tight to avoid damaging the thread�
Mounting / dismounting / setting-up of
some elements is the same for all power
tool models, in this case specific models
are not indicated in the illustration�
Mounting / dismounting parallel guide (see fig. 1)
Fig� 1 shows parallel guide 28 mounting / dismounting
operations�
Installation and removal of vacuum cleaner adapter
(see fig. 2)
Fig� 2 shows vacuum cleaner adapter 1 mounting /
dismounting operations�
Replacement of the saw blade (see fig. 3-4)
After prolonged operation, the saw blade
can become very hot, remove it using
gloves. This will also reduce the risk of
injury by the cutting edge.
• Mount power tool on the side end of the motor as
shown in fig. 3.
• Press spindle lock 8 and manually turn saw blade 14
in order to immobilize it� While pressing spindle lock 8,
turn off bolt 15 with Allen key 27 (see fig. 3).
English
30
Publicidad
