Appendix; Controlling A Tv With The Supplied Remote Control; Setting Up The Remote To Control Your Tv - Pioneer DCS-202K Manual De Instrucciones

42

Appendix

7
Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your PIONEER TV using the
buttons below.
TV Control
Buttons
Button
1 (TV Power)
INPUT
7
CH +/-
VOL +/-
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Operation
Turn the TV on or of.
Switch the TV's input source
between the TV and other
input sources.
Scan up or down through
memorized channels.
Adjust the volume of the
TV.
Setting up the remote to control
your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer
Pioneer
Sony
Panasonic
Samsung
LG
2. Release the 1 (TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
Code Number
1(Default)
2, 3
4, 5
6, 7
8, 9