Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.4.Event ID Descriptions
Event ID
E01
E02
E03
E04
E06
E07
E08
E09
E11
E12
E14
E18
E19
A56
A57
A59
A60
A61
A62
A64
A66
A68
A69
ON-LINE 1000VA / 2000VA / 3000VA
Description of Cause
Bus Start Fail: D C-DC converter or bus sensing circuit
failed.
Bus Volt High: DC-DC converter failed.
Bus Volt Low: D C-DC converter failed.
Bus Unbalanced: D C-DC converter failed.
INV Start Fail: I nverter circuit failed.
INV Volt High: Inverter circuit or output voltage
sensing circuit failed.
INV Volt Low: The load may be too heavy or inverter
circuit failed.
INV Short: T he inverter circuit failed.
Bat Volt High: The external battery module connection
is wrong, or the charger failed.
Bat Volt Low: B atteries failed.
Over Load: U PS is overloaded.
Fan Fail: T he ventilation hole has been covered, or the
fans can't work.
Over Temperature: High ambient temperature, or the
ventilation hole has been covered.
Bat Volt Low: Battery voltage is low.
Bat Cap Low: Battery capacity is low.
Bat disconnect: Battery is disconnect.
Overcharge: C harger voltage is high.
Charger fail: Charger is failed.
Bat Bad: Battery failed.
Over Load warning: U PS is overload.
EPO Off: Missing the EPO connection
High Temperature: High ambient temperature, or the
ventilation hole has been covered. This is shown only
when start up UPS.
Fan Lock: f ans can't work because of lock.
P H 9210 - PH 9220 - PH 9230 .
51 / 58
Publicidad
Tabla de contenido
