Audio Connections - Cambridge Audio incognito Guia De Instalacion

AUDIO CONNECTIONS

SS10
Speaker cable
KP10
PS10
Connections for one AH10 with two main zones attached
6 Incognito multi-room
SS10
Speaker cable
Cat5 Cat5
PS10 p p ower s s upply t t o A A H10
For each AH10 with up to four main zones connected (and no sub-
zones) one PS10 is required.
Sub-zones require a separate PS10 power supply.
For each AH10 (with both main and sub-zones connected) two x
PS10 power supplies are required.
AH10 t t o K K P10
Using a single Cat-5e cable, connect each KP10 to the AH10 via an
RJ45 plug using the EIA/TIA 568A wiring standard (see below) at the
AH10, and an eight-way colour-coded connection at the keypad.
1 – white /green
2 – green
3 – white /orange
4 – blue
The Cat-5 connection from AH10 to KP10 should not exceed 30m/ 100 ft.
Sub-zones connections are made in the same way as main zone
connections but from the sub-zone sockets (see illustration on page 9).
KP10 t t o S S S10 o o r o o ther l l oudspeakers
Connect the KP10 to a pair of speakers with two runs of standard
high-quality speaker cable.
5 – white /blue
6 – orange
7 – white /brown
8 – brown