PowerWalker VFI 6000 Manual Do Usuário página 13

LCD Panel:
Display
Backup time information
Fault information
Mute operation
Output & Battery voltage information
Load information
Programmable output information
Mode operation information
Function
Indicates battery discharge time
H: hours, M: minutes, S: seconds
Indicates that the warning and fault occurs.
Indicates the fault codes, and the codes are listed in details in section 3-9.
Indicates that the UPS alarm is disabled.
Indicates the output voltage, frequency or battery voltage.
Vac: output voltage, Vdc: battery voltage, Hz: frequency
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates the load or the output is short.
Indicates that the programmable outputs are working.
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
12
in numbers.
EN