Hardware Setup - D-Link ShareCenter DNS-320 Guía De Instalación Rápida

This section provides installation information for the ShareCenter Pulse. To
install the ShareCenter Pulse on your local network, refer to the steps below:
1. To remove the top cover you have
move the cover lock to the right.
3. Insert a 3.5" SATA hard drive into
an available drive bay.
DnS-320

Hardware Setup

2. While holding the cover lock, slide
4. Re-attach the top cover.
the top cover backwards. After
sliding the top cover backwards,
lift the top cover up to remove it.
5