Product Operation - Royal Sovereign RCD-3000 Manual Del Propietário

PRODUCT OPERATION

1. Place the machine on a level work surface. Plug in the unit.
NOTE: Before you begin to check your bill or document, make sure you understand the security
features of that specific bill or document. This will ensure that you are using the machine properly.
For Ultraviolet Counterfeit Detection:
1. Flip the Power Selector Switch to "I".
2. Place the bill or document under the UV lights. If the bill has ultraviolet ink or markings, the bill will glow.
For Magnetic Ink Counterfeit Detection:
1. Flip the Power Selector Switch to "II".
2. Rub the area of the bill that is supposed to have magnetic ink on the magnetic head.
3. If magnetic ink is present, the unit will beep and the green magnetic indicator light will blink.
For Watermark Counterfeit Detection:
1. Flip the Power Selector Switch to "II".
2. Place the bill or document under the FL lamp. You should be able to see the watermarks on the bill or
document through the verification window.
For Micro-Printing Counterfeit Detection:
1. Place the bill or document under the micro-printing magnifier lens.
2. You should be able to clearly see the micro-printed words and lines on the bill or document through the
5
verification window.
I: UV lights ON
0: OFF
II: W/M bulb and Magnetic ON