Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
EN
This long range WiFi access point is designed to provide extended cov-
erage support and is ideal for outdoor WiFi solutions thanks to its wa-
terproof casing and heat resistant technology. The GWN7600LR comes
equipped with dualband 2x2:2 MU-MIMO with beam-forming technology
and a sophisticated antenna design for maximum network throughput
and extended WiFi coverage range of up to 300 meters. To ensure easy
installation and management, the GWN7600LR uses a controller-less
distributed network management design and an embedded controller
within the product's web user interface. This allows each access point to
manage a network of up to 30 GWN APs independently without need-
ing separate controller hardware/software and without a single point-
of-failure. Its easy installation and management features packed with
extra coverage support and advanced performance features, make the
GWN7600LR an ideal outdoor access point for mid-size wireless net-
work deployments.
PRECAUTIONS
● Do not attempt to open, disassemble, or modify the device.
● Do not expose this device to temperatures out the range of -30 °C to
60 °C for operating and -30°C to 70°C for storage
● Do not expose the GWN7600LR to environments outside of the follow-
ing humidity range: 5-95% RH (non-condensing).
● Do not power cycle your GWN7600LR during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit to
malfunction.
PACKAGE CONTENTS
1 x GWN7600LR
1 x Cover Bracket
Access Point
1 x Base Bracket
~1~
4 x Screw
4 x Screws and
(PM8 x 115)
Anchors
2 x Assembled
1 x Quick Installation Guide
Screw
1 x GPL Statement
GWN7600LR PORTS
Port
Description
NET/POE
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/ PoE+.
NET
Ethernet RJ45 port (10/100/1000Mbps) to your
router or another GWN76xx.
Factory reset button. Press for 7 seconds to reset
RESET
factory default settings.
POWERING AND CONNECTING THE GWN7600LR
GWN7600LR can be powered on via PoE switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN-
7600LR.
~2~
4 x Locknut
Publicidad
Tabla de contenido
