Replacement Parts And Special Accessories; Initial Use; Your Vacuum Cleaner; Instructions For Use - Siemens VS X4 Instrucciones De Uso

en
Congratulations on your purchase of the Siemens VSX4
vacuum cleaner.
This instruction manual describes various VSX4 mo-
dels, which means that some of the equipment fea-
tures and functions described may not apply to your
model. You should only use original Siemens acces-
sories, which have been specially developed for your
vacuum cleaner, in order to achieve the best possible
vacuuming results.
Please keep this instruction manual for future refe-
rence. When passing the vacuum cleaner on to a third
party, please also pass on this instruction manual.
Fold out the picture pages.

Your vacuum cleaner

1 Adjustable floor tool* (For the same functions, the
appearance of the nozzle may differ from the picture)
2 Telescopic tube with sliding switch but without acces-
sory connection*
3 Telescopic tube with adjusting sleeve and accessory
connection*
4 Flexible hose
5 Handle
6 Hard-floor nozzle
7 Foam filter
8 Parking aid on the back of the appliance
9 Exhaust filter lid
10 Power cord
11 Appliance lid
12 Foam filter lid
13 Carrying handle
14 On/off button with electronic suction regulator
15 Filter control display (Sensor Control)
16 Dust container with carrying handle
17 Storage aid on the underside of the appliance
18 Fluff filter cover
19 Professional upholstery nozzle*
20 Professional crevice nozzle*
21 Upholstery nozzle
22 Accessories holder*
23 Crevice nozzle
24 Brush ring (for fitting on the upholstery nozzle)*
25 Drill dust nozzle*
26 TURBO-UNIVERSAL® brush for floors*
27 Hard-floor nozzle*
Replacement parts and special accesso-
ries
A Hard-floor nozzle VZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
B Hard-floor nozzle VZ124HD
With 2 rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.

Initial use

1
Fig.
Push the handle onto the flexible hose and lock it
in place.
2
Fig.
Push the flexible hose adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
3*
Fig.
a) Telescopic tube without accessory connection:
Push the handle into the telescopic tube.
b) Telescopic tube with accessory connection:
Push the handle into the telescopic tube until it
locks into place.
4*
Fig.
a) Nozzle without accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle.
b) Nozzle with accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
5*
Fig.
Unlock the telescopic tube by moving the sliding
switch or adjusting sleeve in the direction of the ar-
row, and adjust it to the desired length. The slide
resistance on carpet is at its lowest when the tele-
scopic tube has been completely pulled out.
6*
Fig.
a) Place the accessories holder in the required positi-
on on the telescopic tube.
b) Use some pressure to insert the upholstery nozzle
with brush ring and the crevice nozzle into the ac-
cessories holder from above or below.
* Dependent on model
35