Klarstein 10030844 Manual Del Usuario página 13

How to drain out the water inside the unit
9. When you clean the unit internal parts or change the drinkable water, need to
drain out the left water in the water reservoir, just unplug the water drain cap
which located at the bottom of the unit and near the water drip tray, the water
will flow out from the unit completely. If the unit is supplied with the plastic soft
tube, connect this soft tube with the water drain port, it can help you drain out
the water easily.
10. Change water in the water reservoir every 24 hours to ensure a reasonable hy-
giene level. If the unit isn't to be used, drain all water & dry the water reservoir.
Timer Setting
• Timer Delay Time Range: 0.5-19.5 hours. Default Delay Time: 1 hour.
• When the unit is running, you can set the unit with OFF-TIMER to let the unit stop running after your set
delay time.
• And when the unit is on standby, you can set the unit with ON-TIMER to let the unit start to run automati-
cally after your set delay time, then when you go back home or have a dinner, you can enjoy the happy life
that this ice-maker give to you.
How to set the timer
Press the TIMER button first, the default delay time is 1.0 hour displayed delay time in LCD display window,
then press the SELECT button to select your desired delay time. Each press SELECT button one time, the
delay time will increase 0.5 hour, but if you always press the SELECT button, the delay time will change very
quickly. During the process of delay time adjusting, the letter "H" will flash, then after 5 seconds flashing wit-
hout pressing, the "H" letter will change from flashing to always displaying, means the timer program has been
completed.
How to cancel the timer
When the unit has been set with the timer, press the TIMER button, then the
delay time digit and "H" letter display will disappear, mean the timer set has been
canceled.
1 = Timer delay time
2 = Means Hour, and timer setting duration
13