Starting, Pausing, And Stopping Cleaning; Remove The Cleaning Object; Rinsing And Refilling Cleaning Needles; Rinsing - DENTAURUM activeblue Modo De Empleo

5.5. Starting, pausing, and stopping cleaning

Start cleaning with the Start/ Pause button (I, Fig. 2).
Cleaning can be stopped at any time before the cleaning time has elapsed by pressing the Stop button.
Stop cleaning altogether by pressing the Stop button (K, Fig. 2). The display shows the previously set
cleaning time.
i
To improve the cleaning performance, the sense of rotation will change every 30 s
i
With especially stubborn stains it may be necessary to alter to a longer running time
(+ max. 10 min) and then short, manual cleaning, under running water, using a hard
toothbrush.

5.6. Remove the cleaning object

After cleaning:
Never open the beaker while still inside the appliance (Fig. 5).
on the inner wall (Fig. 6).
Carefully check the object for any adhering cleaning needles before delivering.

5.7. Rinsing and refilling cleaning needles

i
The cleaning needles can be used more than once.

5.7.1. Rinsing

After each cleaning cycle, rinse the cleaning needles and prepare fresh activefluid cleaning liquid.
To do this:
i
The magnet holds the cleaning needles in the beaker.
activefluid cleaning liquid
EN
activeblue en 26