Bakeware
The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
BAKEWARE/
RECOMMENDATIONS
RESULTS
Light colored
aluminum
Light golden crusts
Even browning
Dark aluminum and
other bakeware with
dark, dull and/or
nonstick finish
Brown, crisp
crusts
Insulated cookie
sheets or baking
pans
Little or no bottom
browning
Stainless steel
Light, golden
crusts
Uneven browning
Stoneware/Baking
stone
Crisp crusts
Ovenproof
glassware, ceramic
glass or ceramic
Brown, crisp
crusts
10
Use temperature and time
recommended in recipe.
May need to reduce baking
temperatures slightly.
Use suggested baking time.
For pies, breads and casseroles,
use temperature recommended in
recipe.
Place rack in center of oven.
Place in the bottom third of oven.
May need to increase baking time.
May need to increase baking time.
Follow manufacturer's instructions.
May need to reduce baking
temperatures slightly.
Oven Vent
A. Oven vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the oven
vent will cause poor air circulation, affecting cooking and
cleaning results. Do not set plastics, paper or other items that
could melt or burn near the oven vent.
Baking and Roasting
IMPORTANT: To avoid damage to the interior finish, do not place
food or cookware on the oven door or oven bottom.
Before baking and roasting, position racks according to the
"Positioning Racks and Bakeware" section.
To Bake or Roast:
1. Press BAKE.
Press TEMP/TIME or TEMP/HOUR "up" or "down" arrow
pads to set a temperature other than 350°F (177°C) in 5°F
(3°C) amounts. The bake range can be set between 170°F
and 500°F (77°C and 260°C).
2. Press START or START/ENTER.
The temperature can be changed at any time after this step
by pressing the TEMP/TIME or TEMP/HOUR "up" or "down"
arrow pads. Start does not need to be pressed again. If
baking/roasting while the Timer is counting down, the set
baking/roasting temperature can be displayed for 5 seconds
by pressing BAKE.
3. Touch OFF/CANCEL or CANCEL/OFF when finished.
Preheating
After START is pressed, the oven will enter a timed preheat cycle.
The bake indicator light will light up. The Electronic Oven Control
automatically selects the preheat cycle time based on the oven
temperature selected. The cycle time will not change if the
temperature is reset before the cycle countdown ends. Preheat is
complete and the oven is ready to use when a 1-second tone
sounds, the cycle countdown ends, and the set temperature is
displayed.
Preheat temperatures are affected by varying factors such as
room temperature and peak energy usage times. It is normal for
the temperature showing on the display and the actual oven
temperature to differ.
Waiting an additional 10 minutes after the preheat time ends to
put food in the oven is suggested when baking foods with
leavening ingredients, such as yeast, baking powder, baking
soda and eggs.
A