Disassembly; Disassembling The Acoustic Wall; Disposal And Recycling; Legal Notice - sigel. Sound Balance Indicación De Montaje E Indicación De Uso

6

Disassembly

6.1

Disassembling the acoustic wall

The acoustic wall is disassembled as follows:
1. Clean the worst of the dust and dirt from the acoustic wall.
2. Lay the acoustic wall on a soft surface, e.g. a carpet.
3. Remove the 2 anti-slip pads covering the screws on the metal feet.
4. Loosen the 8 screws with a hex key and remove them along with the 2 metal feet.
The acoustic wall has been dissembled.
9
6.2

Disposal and recycling

When the acoustic wall has reached the end of its life cycle, make sure you dispose of it
safely and correctly after disassembly.
The acoustic wall and its packaging should be disposed of according to local waste
disposal regulations and environmental laws.
Dispose of recyclable materials correctly and in an environmentally friendly way. The packaging is
made of plastic and cardboard, and should be recycled separately.
For further information about waste disposal, contact your local authority.
7

Legal notice

7.1

Guarantee

The SIGEL brand stands for quality, functionality and design
An integral part of SIGEL's company philosophy is to always provide our customers with top-quality
brand products. To satisfy this key demand for top quality, SIGEL products undergo strict quality
controls.
1. The guarantee period begins on the date of purchase.
2. The valid statutory guarantee applies.
3. The guarantee does not apply in cases of misuse, negligence, improper use or other uses of
the product that do not correspond to the enclosed user guide.
4. Guarantee claims will only be accepted upon presentation of the original proof of purchase,
which states the date of purchase and product description, along with the defective pro-
duct. SIGEL is free to either exchange the product or to reimburse the purchase price to the
consumer.
For further information about the manufacturer's guarantee and terms of guarantee, visit
www.sigel-office.com/guarantee
7.2

Copyright and proprietary rights

All contents of this user guide are the intellectual property of SIGEL GmbH and are subject to
copyright protection.
The product, wordmark and design mark are legally protected.
Any duplication, processing, distribution, transfer to third parties – in whole or in part – and all
types of utilisation outside the boundaries of copyright law require written permission from SIGEL
GmbH. SIGEL GmbH reserves the right to take legal action against any violations.
SIGEL reserves the right to make changes to this user guide or to the technical details given in the
information and illustrations in this user guide.
All product designations named in this user guide are trademarks of the respective companies and
are hereby acknowledged.
Sound Balance acoustic wall 17