Description Of The Device; Using The Appliance; Cleaning And Maintenance; Technical Data - camry Premium CR 7908 Manual De Uso

17. After finished using, release the water from the water tank.
18. If the device is not used for long periods of time, unplug it from the network.
19. Do not move the device when the water tank is filled with water.
20. Do not place any objects on the device.
21. The devices can be used only with efficiently working ventilation.

DESCRIPTION OF THE DEVICE

1. Air outlet
4. Holder
7. Water tank
10. Two ice containers

USING THE APPLIANCE

A noticeable reduction in the temperature of the exhaust air occurs after putting into the water tank 2 plastic containers attached to the
product previously filled with water and frozen in the freezer. It is recommended to fill the tank with cold tap water.
1. After unpacking the device from the packaging, mount the wheels and place the device on a dry, flat surface, then connect the power
plug.
2. Slide out the water tank (7) on the back of the machine and pour in the water. Be careful not to exceed the maximum level.
3. Turn on the device with the 8.4 button on the control panel or remote control. Manual operation of the device is identical to operation
via a remote control.
8.1 - Air speed adjustment button: slow, medium, fast.
8.2 - The button reduces the temperature of the air by activating the water pump. Two ice containers (10) are included in the set. To use
them, fill them with tap water up to ¾ height and freeze. Then insert one or both of them into the water tank (7). In order to blow
out cool air, there must be water inside the tank (7). During operation, periodically check the water level and add water. Turning
on the button simultaneously activates the air humidification function.
8.3 - The button causes oscillation of vertical louvers that ensure even distribution of the cooled air stream. The horizontal blinds do not
move automatically - you can move them manually.
8.4 - Button for switching the device on and off.
8.5 - The button allows you to change the blower mode. In addition to the normal mode, "NATURE" and "SLEEP" are available.
"NATURE" mode imitates the action of natural wind by changing the blower speed about every 10 seconds and successively
changing the speed of the blower between slow, medium to fastest. On the other hand, setting the "SLEEP" mode will result in
the device switching off after a specified time. If we set the slow speed, the device will turn off automatically after 30 minutes. If
we set the medium speed, after 30 minutes the device will reduce the speed to slow, and after another 30 minutes it will turn off
automatically. If we set the fastest speed, the device after 30 minutes will reduce the speed to medium, then after another 30
minutes it will slow down slowly, and after another 30 minutes it will turn off automatically.
8.6 - The display shows the room temperature level.
8.7 - The button allows you to program the operation time of the device from 1 to 12 hours. If you don't use button 8.7, the device will
work until you turn it off manually.
8.8 - The button turns off the control panel lighting.
4. To end the operation of the device, switch off the device with the 8.4 button.

CLEANING AND MAINTENANCE

It is recommended to clean the device with a soft, dry cloth. Do not use any chemical solvents as they may permanently damage or
deform the surface. If the device will not be used for three months or longer, remove the batteries from the remote control. Pour
water out of the tank before storage. Dry the device to avoid moisture damage. Set the 8.1 button to the highest fan speed, the
device should work for about 10 minutes to dry the internal filter.

TECHNICAL DATA

Supply voltage: 220-240 V ~ 50 Hz
Power: 65W Maximum power: 300W
Capacity: 7L
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
2. Water level indicator
5. Filter mesh
8. Control panel
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
3. Wheels
6. Power cord
9. Remote control
Device is made in class I of insulation.
Device is compliant with EU directives:
Low voltage directive (LVD)
Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
DEUTSCH
4