Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Turning
the
TV
On and
Off
SOURCE
Press The POWER(_ button on Theremote control.
You can also use the POWER _ button on the front of the panel.
Plug&Play
Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1,
Press the POWERO
button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER_
button, then "Select the language of the OSD" menu is
automatically displayed.
2,
Press the ENTER_
button to enter the language.
Press the _ or v buttons to select language, then the ENTER_
button.
"Select the antennas to memorize." menu is automatically displayed.
3,
Press the A or v buttons
to memorize
the channels
of the selected
connection.
Press the ENTER_
button
to select
"Start".
If the antenna is connected to ANT t (AIR), select "Ai¢' and if it is connected to
ANT 2 (CABLE), select "Cable",
_,- If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable",
>'- In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the _ or _
button, then press the ENTER_
button,
Contact your local cable company to identify the type of cable system that exists in your
particular area,
4,
The TV will begin
memorizing
all of the available
channels.
After
all the available
channels
are stored,
the Auto program
menu reappears.
Press the ENTER_
button
when
channel
memorization
is complete.
"Select the clock
mode."
menu
is automatically
displayed.
To stop the search before it has finished, press the ENTER_
button with stop selected.
5.
Press the ENTER_
button.
Press the _ or _ buttons to select "Manual" or "Auto", then the ENTER_
button.
Switches the Daylight Saving Time function on or off.
English- 13
Publicidad
