Publicidad
Idiomas disponibles
Idiomas disponibles
¢55
CZ_
EZ_
EZ3
_
MSU.G
Setting Lp the Remote to Operate Your DVD
1.
Turn off your DVD.
2.
Press the DVD button oll your TV's remote control.
3.
Press the SEr button on yourTV's
remote control.
4.
Using the number buttons on your remote conlrol, enter three digits nf the DVD cnde listed on
page 20~21 of this manual for your brand of DVD. Make sum you enter three digits of the code,
even if the first digit is a "0". (if morn than one code is listed, try the first one.)
5.
Press the POV_ERO
button on the remote controh
Your DVD should turn on if your remote is set up correctly.
if your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed fnr your brand nf DVD. if no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the vnlume buttons still cnntrol ynur TV's volume.
655
EZ_
EZ_
EZ_
_
_AMSUHG
J
Setting Up the Remote to Operate Ynur Set lbp Bnx
1.
Turn off your STB.
2.
Press the SFB button on your
...........................................................................................................
3.
Press the s_:r button on yourTV's
remote control.
4.
Using the number buttons on your remote control, enter three digits of the STB code listed on
page 21 of this manual for your brand of STB. Make sure you enter three digits of the code, e'_en
if the first digit is a "0". (if more than one code is listed, try the first one.)
5.
Press the POWERO
button on the remote controh
Your STB should turn on if your remote is set up correctly.
if your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for ynur brand of STB. if no nther codes are listed, try each code, 000 through (t74.
Note on Using Remote Control Modes: STB
When your remote control is in "STB" mode, the volume buttons still control your TV's "_nlume.
English- 18
Publicidad
