Dismantling The Electric Antifreeze Kit - Truma AquaGo comfort Manual Del Usuario

Plug
Holder
Lug
Fig. 9
4. Switch ON the Truma AquaGo™ instant wa-
ter heater at the POWER switch.
5. Insert and close the access door.
14
6. The Truma AquaGo™ instant water heater is
now ready for using the control panel inside
your vehicle.

Dismantling the electric antifreeze kit

For decalcification you must use the water inlet
filter (included with the delivery of the Truma
AquaGo™ instant water heater).
1. Remove the access door.
2. Switch OFF the Truma AquaGo™ instant
water heater at the POWER switch and at the
control panel (set Operating mode to OFF).
3. Turn OFF the water supply or switch OFF the
water pump.
4. Open a hot water faucet and leave it open
in order to depressurize and vent the water
system.