Sharp FX-J80U Manual De Operación página 22

OTHER SETTINGS 3
HOW TO CHANGE VARIOUS SETTINGS 2
Link settings with a
smartphone
1. Select by following Steps 1 - 4
on page 19.
2. After is displayed, start the App
and register the air purifier.
Setting up Complete
Blink
A connection error is occuring if
Please confirm the router and try again.
3. Complete
Initialization of Wi-Fi
function
1. Select by following Steps 1 - 4
on page 19.
2. After is displayed press "AUTO"
button.
♪
Initializing
A connection error is occuring if
Please confirm the router and try again.
3. Complete
• Please delete the device registration from the
App when initializing the air purifier which is
already connected to the Wi-Fi.
♪
～
is displayed.
♪
Complete
♪
～
Blink
is displayed.
♪
EN-20
Update
1. Start the App then tap "
"Home" screen and select "Update".
2. Select by following Steps 1 - 4
on page 19.
3. will be displayed.
4. Follow instructions on the App
screen.
will be blinking during update.
A connection error is occuring if
Please confirm the router and try again.
5. Air purifier will automatically
go off after completion of the
update.
It may take few minutes to complete the update.
Confirmation of MAC
address
1. Select by following Steps 1 - 4
on page 19.
2. Press Plasmacluster Express Clean
button to display MAC address.
For example :
In case MAC address is "12 : 34 : 56 : AB : CD : EF"
♪ ♪ ♪ ♪
3. Complete
" at the
is displayed.
Go off
♪ ♪ ♪ ♪
～
♪