SYNQ DLP-6 MK2 Manual De Instrucciones página 10

ENGLISH
OUTPUT PARAMETERS – COPY SETTINGS
You can copy the settings from the current output channel to one or more other outputs. This means that
only the ACTUAL SETTINGS are copied, there will be no constant synchronization between the channels!
 Turn the DIAL (4) to choose the target channel you want to copy the settings (of the current output) to.
 Press the SAVE button (11) to confirm copying  all settings will be copied between the two outputs.
If you like, you can choose another target output to copy the current settings.
MAIN MENU – PROGRAM: Load settings
You can make any personal setting but to make life easier the DLP-6 MK2 has some standard configurations
pre-programmed. If you like you can use these standard settings to start your configuration and fine-tune all
parameters step by step. On the last page of this manual you will find an
overview of the standard settings.
 Press the DIAL (4) until the first display on the right is shown.
 Press
the ENTER
The display now shows "Load presets"
 Press the ENTER button (11) again and turn the DIAL (4) to choose one of the
presets:
 1: 2x2-WAY+SUM X-OVER
 2: 2x3-WAY X-OVER
 3: 4WAY X-OVER + 2
 4: 5WAY X-OVER + 1
 5: 6WAY X-OVER
 6: Muted all
 Press the ENTER button (11) to confirm your choice  the selected standard settings are loaded.
You can fine tune this standard configuration and save it as a custom program (see further to learn how)
MAIN MENU – PROGRAM: Store a Program (1 – 30)
You can save and recall up to 30 personalized user programs. First you should make the complete
parameter setup, when this is done you can save it as follows:
 Press the DIAL (4) until the first display on the right is shown.
 Press the ENTER button (11) to enter the submenu "program".
 Press the NEXT button (6) until the display shows "Store a program"
 Press the ENTER button (11) and turn the DIAL (4) to choose the location (1 to
30) where you want to store the program.
 Press the NEXT button (6) to insert a name for the program  on the second
line of the display the cursor starts flashing.
 Turn the DIAL (4) to select a character and press the NEXT button (6) to set the next character, ...
 When the name is ready, press the ENTER button (11) to save the program.
MAIN MENU – PROGRAM: Load a Program (1 – 30)
You can save and recall up to 30 personalized user programs. Follow the steps below to load one of the 30
programs:
 Press the DIAL (4) until the first display on the right is shown.
 Press the ENTER button (11) to enter the submenu "program".
 Press the NEXT button (6) until the display shows "Load a program"
 Press the ENTER button (11) and turn the DIAL (4) to choose the program you
want to load.
 Press the ENTER button (11) to confirm your choice  the selected program
will be loaded and is ready to be used.
MAIN MENU – SECURITY: Lock type
Imagine you worked a long time to have the perfect settings and some idiot
changes everything without knowing what he's doing: a complete disaster and in
worst case even damaged speakers ... That's why we give you the possibility
to lock your settings!  This is how to protect your precious work:
 Press the DIAL (4) until the first display on the right is shown.
 Press the NEXT button (6) until the display shows "SECURITY"
 Press the ENTER button (11) to enter the submenu.
 IF THE PROCESSOR IS LOCKED: you will be asked to Enter your password
SYNQ
®
button (11) to enter the submenu "program".
8/96
OPERATION MANUAL
DLP-6 MK2