SYNQ DLP-6 MK2 Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 68
ENGLISH
 Open the "CONFIG" menu
 Select the option "Link Setting"  window will open, similar to the windows shown above.
 Set the desired links:
See the 2 example windows: on the right window you can clearly see:
o
The inputs are linked (Link1 = InA + InB)
o
Outputs 1 + 2 are linked (Link1 = Out1 + Out2)
o
Outputs 3 + 4 + 5 + 6 are linked (Link3 = Out3 + Out4 + Out5 + Out6)
 Once you have set the links, press the "Set Link" button.
Please note: It can take 5seconds or more before the window closes, this in normal!
 Adjusting the different parameters
Simply click the icons of the parameters you want to change, screens like the ones below will appear.
On top of the windows you have extra TABs that make it very easy to jump from one parameter to the
other.
Remark 1: when you key in the parameters you must confirm them with the "ENTER" button on your PC-
keyboard, otherwise the values are not saved!
Remark 2: If you have doubts about certain parameters, please read the previous chapters for more
information.
SYNQ
®
NO LINKS SET
INPUTS A&B are linked
OUTPUTS 1+2 and 3+4+5+6 are linked
13/96
OPERATION MANUAL
DLP-6 MK2

Publicidad

Tabla de contenido
loading

Tabla de contenido