Product Dimensions; Electrical Requirements - arietta ALZ430SSA Guía De Instrucciones Para Instalación

Dimensions and Clearances
H
G
I
E
A
Recirculating
Kit height
J

Electrical Requirements

IMPORTANT
Observe all governing codes and ordinances.
It is the customer's responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is adequate and in
conformance with National Electrical Code, ANSI/NFPA 70
— latest edition*, or CSA Standards C22.1-94, Canadian
Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and
all local codes and ordinances.
If codes permit and a separate ground wire is used, it is recom-
mended that a qualified electrician determine that the ground
path is adequate.
A copy of the above code standards can be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
F
M
D
C
B
Duct cover
Kit height
K (6")
L (12")
•
•
1.
2.
Follow the electrical connector manufacturer's recommended
procedure. Aluminum/copper connection must conform with local
codes and industry accepted wiring practices.
•
•
4
ALZ430SSA
A 30" (76 cm)
B 23 ⁄
7
64
C 17 ⁄
63
64
D 12 ⁄
3
64
E 2 ⁄
10
32
F 29 ⁄ " (74 cm)
4
32
G 7 ⁄
3
32
H 2 ⁄
9
16
I ⁄
13
J 21
59
K 23
15
L 29
59
M 6" (15.24 cm)
A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is
required.
If the house has aluminum wiring, follow the procedure below:
Connect a section of solid copper wire to the pigtail leads.
Connect the aluminum wiring to the added section of
copper wire using special connectors and/or tools designed
and UL listed for joining copper to aluminum.
Wire sizes and connections must conform with the rating of
the appliance as specified on the model/serial rating plate.
The model/serial plate is located behind the filter on the rear
wall of the range hood.
Wire sizes must conform to the requirements of the National
Electrical Code, ANSI/NFPA 70 (latest edition), or CSA
Standards C22. 1-94, Canadian Electrical Code, Part 1 and
C22.2 No. 0-M91 (latest edition and all local codes and
ordinances.
ALZ436SSA
36" (91.54 cm)
" (58.7 cm)
" (45.7 cm)
" (30.6 cm)
" (5.9 cm)
35 ⁄ "(89.5 cm)
7
32
" (18 cm)
" (6.5 cm)
" (1 cm)
32
⁄ (55.7 cm)
64
⁄ (60.8 cm)
16
⁄ (76 cm)
64