Saving Images On An External Media Device - Sony HDR-TD10 Guía De Operaciónes

Saving images on an
external media device
You can save movies and photos on an
external media device (USB storage
devices), such as an external hard disk
drive. You can also play back images on the
camcorder or another playback device.

Notes
Refer to the instruction manual supplied with

the external media device.
Tips

You can save 3D movies on an external media

device as they are.
You can import images saved on the external

media device to your computer by using the
supplied software "PMB. "
Functions available after saving images
on an external media device
playback of images through the camcorder

(p. 49)
importing images to "PMB"

Devices that cannot be used as an
external media device
You cannot use the following devices as an

external media device.
media devices with a capacity exceeding 2 TB

ordinary disc drive such as CD or DVD drive

media devices connected via a USB hub

media devices with built-in USB hub

card reader


Notes
You may not be able to use external media

devices with a code function.
The FAT file system is available for your

camcorder. If the storage medium of the
external device was formatted for the NTFS file
system, etc., format the external media device
using the camcorder before use. The format
screen appears when an external media device
is connected to your camcorder. Make sure that
important data has not previously been saved
on the external media device before you format
it using the camcorder.
Operation is not assured with every device

satisfying requirements for operating.
For details on available external media devices,

go to the Sony support website in your
country/region.
1
Connect the AC Adaptor and the
power cord (mains lead) to the DC
IN jack of your camcorder and the
wall outlet (wall socket) (p. 15).
2
If the external media device has
the AC power cable, connect it to
the wall outlet (wall socket).
3
Connect the USB Adaptor Cable
(supplied) to the external media
device.
4
Connect the USB Adaptor Cable
to the  (USB) jack of your
camcorder.
Make sure not to disconnect the USB
cable while [Preparing image database
file. Please wait.] is displayed on the
LCD screen. If [Repair Img. DB F.] is
displayed on the camcorder screen,
touch .
USB Adaptor Cable
(supplied)
US