Hardware Installation - Korenix JETPOE JetNet 6710G Serie Guía De Instalación Rápida

1-2 Introduction to the Manual
The following manuals are included as PDF files on the CD-ROM:
4Quick Installation Guide: includes information on installing all versions of JetNet 6710G /
6810G series PoE Switch
4User manual – Configuration: applied to the managed versions of JetNet 6710G/
6810G series PoE Switch
2. Appearances
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
JetNet 6710G-M12

3. Hardware Installation

3-1 Powering of the system
The Power input port is located at the top of the front panel and supports redundant input
function via a proprietary assembly capable IP-67 connector (CDG-L207SA) included in the
shipment. If you cannot find this power connector, please contact your local distributor. For
the available input power range and recommended cable size, please refer to the below
table.
Power Input (DC Voltage)
Minimum
JetNet 6710G-M12 48
JetNet 6710G-RJ 48
JetNet 6810G-M12 22
JetNet 6810G-RJ 22
Redundant
Power Input
Console
Port Alarm
Output
2x1000 Base-T
M12 A-coding
Maximum Recommended
60 48
60 48
60 24
60 24
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status
8x10/100 Base-TX PoE 2x1000 Base-T
M12 D-coding M12 A-coding
JetNet 6710G-RJ
Input Conductor Cable Size
Redundant Input AWG No. / Cable
Area (mm
AWG 14 / 2.0
V1, V2
AWG 14 / 2.0
V1, V2
AWG 14 / 2.0
V1, V2 bind together
AWG 14 / 2.0
V1, V2 bind together
2
)