Aqua Medic aquarius plant 60 Manual De Instrucciones página 7

1. Technical Data
LED aquarium light for freshwater aquaria
The aquarius plant
illumination of your aquarium. The compilation of the six individual light colours can be specifically
adjusted to the needs of
controller which makes individual adjustment of light colour, light intensity and light settings
possible.
Equipment:
- LED light with 6 colours
Prepared for connecting a
-
- Anodized housing made of aluminum
- For safety 24 V with external transformer (100 - 240 V / 50 - 60 Hz)
- Adjustable holder for fixing onto the aquarium
Optional:
- aquafit II steel wire suspension
Total
aquarius
consumption
60 max. 65 W
90 max. 95 W
120 max. 128 W
2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
Included in shipment:
aquarius plant incl. power pack 24 V DC output
•
aquaria fixing (please refer to pict. 2)
•
4 screws for fixing the optional wire suspension aquafit 2
•
3. Safety advices
The lighting system cannot be used as aquarium cover. It has to be mounted only above the
•
aquarium. When using the wire suspension aquafit 2 (not included in shipment), the minimum
distance between lighting and aquarium should be at least 30 cm.
The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of
•
the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components. When used under a cover, one or more permanently
running fans with sufficient power are required. Otherwise, overheating or corrosion
due to condensation may occur.
light is made of high quality aluminium in a slim design which offers even
freshwater aquaria. The light has preparation for connecting a
6-channel controller
for cooling passively (no fans)
Total
Dimension (l x w
LED
x h)
lumen
4,550 lm 580 x 210 x 25 mm
6,825 lm 840 x 210 x 25 mm
1,100 x 210 x 25
9,100 lm
For aquaria
(length)
600 - 900 mm
850 – 1,100
mm
1,150 – 1,350
mm mm
6-channel
Light Colour
colours temperature
white 6,000 – 6,500 K
warm
white 2,800 – 3,200 K
blue 460 - 470 nm
red 640 - 660 nm
ruby red 620 - 630 nm
green 520 - 530 nm
7