Getting Started; Main Unit - La Crosse WS8007 Manual Del Usuario

Part A:
A1: Radio Controlled Icon
A2: Time Display
A3: Temperature
Part B:
B1: "MODE" button
B2: "SNOOZE" button
B3: "ALARM" button
Part C:
C1: Wall Mount Hole
C2: Battery Compartment

3. Getting Started:

3.1 Main Unit:

Slide open battery compartment cover [C2]

Insert 4 x AA size batteries observing polarity *"+" and" –" marks+.

Replace battery compartment cover [C2]

Use a pin to press the RESET [B6] button on the rear of unit, the unit is now

ready for use.
4. Time and Alarm Setting
4.1 Radio Controlled Clock:
After batteries inserted, the clock automatically starts to scan the DCF time signal.

Radio Control Icon"
flashes,
Indicating now is receiving
DCF signal
The clock automatically scans the time signal at 3.00 a.m. every day to maintain

accurate timing. If reception fail, scanning stops ("
repeats again at 4.00 a.m. 5.00a.m. and6.00a.m.
The clock can be set to scan the time signal manually by holding "

for 3 seconds. Each reception takes about 5 minutes. If receptions fail, scanning
A4: Date, Day of Week
A5: Indoor Humidity
B4: "+/12/24" button
B5: "-/C/F/ " button
B6: "RESET" button
C3: Stand
" flashes on the LCD.
turns on,
Indicating signal received
successfully
English - 2
disappear,
Indicating signal reception
failed
" on LCD disappear) and
" button (B5)