Normal Play - JB Systems USB3.1-RDS Manual De Instrucciones

ENGLISH
 How to search for radio stations:
Use the PRE button (15) to search for a radio station with a lower frequency or use the NEXT button (16)
to search for a radio station with a higher frequency.
 Press the PRE or NEXT button shortly to activate the auto scan function : the tuner will scan the
frequencies until it finds a radio station with sufficient signal.
 You can also search manually. For this, press the PRE or NEXT button for about 3 seconds. You are
now in manual mode. Each time you will now press the PRE or NEXT button shortly, the frequency will
be decreaced or increased by one step.
 How to store radio channels:
There are 2 ways to do this: radio stations can be stored automatically or manually in the preset channels.
Full automatic scanning and storage:
 Press the A.STORE button (25) shortly to activate the automatic radio scan and storage function.
Available radio stations will be automatically stored for all the bands..
Manual scanning and storage:
 Use the T.BAND button (18) to toggle between the available radio bands FM1 > FM2 > FM3 > MW1
> MW2
 Use the PRE button (15) to search for a radio station with a lower frequency or use the NEXT button
(16) to search for a radio station with a higher frequency. (see previous chapter "how to search for
radio stations)
 Once you have found a radio station you want to store in the presets:
 Keep the PLAY/PAUSE button (13) pressed for about 3 seconds to store the current radio station
as preset 1 of the selected band.
 Keep the STOP button (14) pressed for about 3 seconds to store the current radio station as
preset 2 of the selected band.
 Keep the REPEAT button (17) pressed for about 3 seconds to store the current radio station as
preset 3 of the selected band.
 Keep the SHUFFLE button (24) pressed for about 3 seconds to store the current radio station as
preset 4 of the selected band
 Keep the FOLDERS/PRESETS - button (21) pressed for about 3 seconds to store the current
radio station as preset 5 of the selected band
 Keep the FOLDERS/PRESETS + button (22) pressed for about 3 seconds to store the current
radio station as preset 6 of the selected band
CD / USB / SD/SDHC Player:
 Single play or normal (continuous) play:
Keep the button pressed for about 3 seconds to toggle between the 2 available playback modes:
 SINGLE PLAY: when you press the play button, only 1 song will be played. The player stops at the
end of each track and waits at the beginning of the next track.
 NORMAL PLAY: the complete CD or Storage device will be played without interruption.
 Navigation:
 Navigation between folders (if available on your CD):
 press the FOLDERS/PRESETS – button (21) shortly to navigate to the previous folder
 press the FOLDERS/PRESETS + button (22) shortly to navigate to the next folder.
 Navigation between tracks:
 Press the PRE button (15) shortly to go back to the starting point of the track
 Press the NEXT button (16) shortly to go to the starting point of the next track
 Navigation in a track:
 Keep the PRE button (15) pressed to navigate backwards in the current song
 Keep the NEXT button (16) pressed to navigate forwards in the current song
 Repeat function:
Press the REPEAT button (17) shortly to toggle between the available repeat modes:
 RPT ONE (REPEAT ONE): the same track will be played and repeated contuniously
 RPT FOLD (REPEAT FOLDER): all the songs of the current folder will be played and repeated
continuously
JB SYSTEMS
®
6/35
OPERATION MANUAL
USB3.1-RDS