Diagrams - Xylem CentriPro Aquavar ABII Manual De Instrucciones

8: DIAGRAMS

8: DIAGRAMS
Motor Overload and Application Switch Setting
When the unit is powered, the Motor Overload and Application Setting Switches are at a high voltage
DANGER
potential. Always turn off the disconnect switch and circuit breaker and wait 5 minutes before touching
Hazardous
voltage
the Motor Overload or Application Setting Switches.
Application Switch Setting
See chart that follows for
correct switch settings.
Aquavar ABII Wiring Diagram
Input
1 Phase
Line input power from
2-pole disconnect or
circuit breaker.
Do not connect 230V to a 115V controller. This will
WARNING
damage the controller and voids the warranty.
8
Diagram 3
See Manual For
Switch Settings
Output
Motor
To Motor
Applic.
Overload
Type
Setting
1 2 3 4 1 2 3 4
determines order of colors.
Diagram 4
Motor Overload Setting
Switches
See chart that follows for
correct switch settings.
Pressure
Sensor
Line output to motor.
Correct motor rotation
Pressure
Sensor
9K518