Terrestrial; Terrestrial Measure - Galaxy Innovations ComboF DVB-S Manual De Instrucciones

6. T
ERRESTRIAL
U
SER CAN MEASURE THE LIVE
,
SPECTRUM THE SCOPE BETWEEN TRANSPONDERS
ALL THE SAVED FREQUENCIES AND LIST ALL THE LOCKED ONES
T : M
HERE ARE SIX SUBMENUS
, S , RF C
CHART COPE HANNEL
6. 1 T
ERRESTRIAL
The device will show SNR, CBER, VBER, power value,
strength and quality of the connected live signal. Please
see below for detail.
:

0V:

DVB T2:

FREQ:

BW:

SNR:

CBER:

LBER:

POWER:

Str:

Qlt:

User`s Manual
DVB-T/T2 ,
SIGNAL ANALYZE THE
,
AUTO SCAN
, A S , S
EASURE UTO CAN
L S .
IST AND ETTING
M
EASURE
The lock status. The signal is locking if the icon is green or the color of
the icon is red.
The antenna output voltage. The values are 0V, 13V and 18V.
The terrestrial system. The values are DVB T and DVB T2. Press [/]
to switch them.
The current frequency. Press [/] to change the frequency or [OK]
to edit it.
The bandwidth of the live signal. Press [/] to switch between 6M,
7M and 8M.
The signal noise rate value of the live signal.
The CBER(BER before FEC) value of the live signal.
The LBER(BER after LDPC) value of the live signal.
The power level value of the live signal.
The strength of the live signal in percent.
The quality of the live signal in percent.
.
PECTRUM
12/18