3.
Analyze the signal in Terrestrial Measure menu.
4.
Analyze the scope in Scope menu and the spectrum in Spectrum Chart menu.
How to measure cable signal:
1.
Connect the signal cable to IEC-Type, Female jack first.
2.
Analyze the signal in cable Measure menu.
3.
Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.
Please refer below descriptions if you want to learn all functions.
4. H
OME MENU
The meter will enter this menu first during power on. Press
[/] to switch items or [OK] to enter submenus.
Satellite:
Terrestrial:
Cable TV:
System Setting:
power off and so on.
5. S
ATELLITE
The submenu for DVB-S/S2 functions. User can read the parameters of the live signal, analyze the
spectrum chart, get the constellation chart, calculate the angles for a special satellite or edit the
parameters of satellites.
5.1 S
M
ATELLITE
EASURE
The device will show the strength and quality of the
live signal. And also BER, CNR, modulator type, FEC
and power level
S2-Q-4/5:
036.0°E Eutelsat 36:
User`s Manual
Submenu for DVB-S/S2 system.
Submenu for DVB-T/T2 system.
Submenu for DVB-C system.
Submenu for system parameters setting. Such as language, auto
The modulator type, FEC and DVB system of the signal.
The current satellite. Press [/] to switch between satellites
and press [OK] to enter satellite list to select satellite. Press [OK]
4/18
button to select the focused satellite and press [MENU] to exit