Taylor 3879 Manual De Instrucciones

Model 3879
Digital Kitchen Scale
Instruction Manual
Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor ® scale is an example of
superior design and craftsmanship. Please read this instruction manual carefully before use.
Keep these instructions handy for future reference.
Battery Information
This scale operates on 2 – 3 volt CR2032 lithium batteries (installed). There is a strip under the
lithium battery cover to prevent battery drain in shipping. Please remove the strip before
continuing with these instructions. Also, some models have a static cling label on the lens to
prevent scratching. Please remove before use.
Replace the batteries when the Low Battery warning " " appears on the display, or the
readings grow dim or irregular. To replace the batteries:
1. Use two 3 volt CR2032 lithium batteries. Always replace all batteries at the same time; do not
combine old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-
cad, ni-mh, etc.) batteries. Do not dispose of batteries in fire, as batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of time.
2. Remove screw (or screws) from the battery compartment cover on the bottom of the scale
and remove the cover.
3. Remove the old batteries from the compartment.
4. Place the new batteries with the "+" sign up into the battery compartment.
5. Replace the battery compartment cover and screw(s).
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the
batteries if the scale will not be used for a long period of time.
General Weighing Operation
1. Place the scale on a hard, level surface.
2. Press the " /TARE" button to turn the scale on. The display will show " " and then zero
when it is ready for use. If the display does not show zero, press the " /TARE" button to reset
(tare) the scale to zero.
3. Your scale weighs in pounds/ounces (lb oz), grams (g), fluid ounces (fl. oz.) and milliliters
(ml). Press the "MODE" button to change the units of measurement.
4. Place the item to be weighed on the center of the platform. The weight will display. As you
add weight, the weight displayed increases.
5. The scale will turn off automatically after approximately 1 minute of non-use or if there is no
change in weight after approximately 3 minutes. Press, hold and release the " /TARE" button
to turn the scale off manually.