Viking VBBO1601 Manual De Uso Y Instalación página 3

IMPORTANT - PLEASE READ AND FOLLOW!
5. Place cabinet(s) in approximate fi nal position.
Level cabinets using leveling legs. If installing
two or more cabinets, use 1/2" SMS screws
provided to screw them together. (See
illustration #3).
6. On cabinets with interchangeable left or right hand swing,
determine appropriate hinge side for cabinets. Remove
outside door panel. Install hinges by placing hinge
bracket in hole in door and fasten in place with hardware
provided. Screw hole plate covers in appropriate pre-
drilled holes in cabinet side. Fasten hole covers with
hardware provided. (See Illustration #4).
7. Cabinet doors must be adjusted when cabinets are level
in fi nal position. There are two adjustment screws on the
hinge receiver. (See Illustration #5)
• The front screw is used to center the door in the
opening. Turning the front screws in or out will
center the door over the cabinet opening.
• The back screw is used to align the front of the
door with the cabinet frame and secure the door
to the cabinet. Slightly loosen the screw and slide
door in or out. Retighten the screw to secure the
door.
Illustration #3
Install (4) Tinnerman clips
(provided) before fastening
cabinets together.
Use #8 x 3/8"
(.95 cm) fl at head
M.S. and locknut
to attach hinge
bracket to the
inside door
Illustration #5
3
Mount cabinets with
#10 x 1/2" (1.3 cm)
screws provided.
Use #8 x 3/8"
(.95 cm) M.S.
and locknut
to fasten hole
cover to inside
door panel.
Back
Screw
Front
Screw