Viking VBBO1601 Manual De Uso Y Instalación página 5

INSTALLATION
10. BACK PANEL INSTALLATION
• Remove all protective covering from panel and install using the 10 x 1/2" tek screws provided. (See Illustration #8).
• Attach rear toe kick to legs. (See illustration #8).
NOTE: For end of the run panels, the rear, front, and side toe kicks must be modifi ed. (See illustrations #7 & #8)
Illustration #8
2. Attach from inside
with (4) tek screws
provided.
(front and rear)
11. INSTALL LOCALLY SUPPLIED COUNTERTOP
All Vikiong outdoor cabinets must be installed with a locally
supplied counterop. The cabinets are designed for a minimum
countertop thickness of 1 1/8" (2.9 cm) such as you would fi nd
with granite or quartz material. If a countertop material thicker
than 1 1/2" (3.8 cm) is used, the appliances should be shimmed
to the proper height.
12. Install per appliance's installation instructions.
1. Place rear panel into area of the
cabinet.
3. After modifying rear toe kick (See
dimension chart at the bottom of page 4)
- snap toe kick into place
Rear toe kick (C)
5