Profiles-Set Tones; Offline Profile - Nokia N93-1 Guia Del Usuario

Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press
To change the profile, press
Scroll to the profile you want to activate, and select OK.
To modify a profile, press
Scroll to the profile, and select
Scroll to the setting you want to change, and press
to open the choices. Tones stored on the memory card are
indicated with
and listen to each one before you make your selection.
To stop the sound, press any key.
When you choose a tone,
of bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
If you want the caller's name to be said when your device
rings, select Options
name to On. The caller's name must be saved in Contacts.
To create a new profile, select

Offline profile

The Offline profile lets you use the device without connecting
to the wireless network. When you activate the
profile, the connection to the wireless network is turned
92
, and select Tools > Profiles.
in the standby mode.
, and select Tools > Profiles.
Options > Customize.
. You can scroll through the tone list
Tone downloads opens a list
> Customize, and set Say caller's
Options > Create
off, as indicated by
area. All wireless phone signals to and from the device
are prevented. If you try to send messages, they are placed
in the outbox to be sent later.
Warning: In the offline profile you cannot make
(or receive) any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing profiles.
If the device has been locked, enter the lock code.
Warning: Your device must be switched on to use
Offline
wireless device use is prohibited or when it may
cause interference or danger.
When you have activated the
use the wireless LAN (if available), for example, to read your
e-mail or browse on the Internet. Remember to comply with
any applicable safety requirements when establishing and
using a wireless LAN connection. See "Wireless LAN," p. 15.
To exit the Offline
another profile. The device enables wireless transmissions
new.
again (providing there is sufficient signal strength).
If a Bluetooth connection is activated before using the
Offline profile, it is deactivated. A Bluetooth connection
is automatically reactivated after you exit the
Offline
profile. See "Settings," p. 79.
in the signal strength indicator
profile. Do not switch the device on when
Offline profile, you can still
profile, press the power key, and select
Offline