GALAGAR MIG 255M Manual Técnico De Instrucciones página 16

2. TRANSPORT AND INSTALLATION.
Knocks and sudden movements must be avoided when transporting the equipment. The transport position
will be shown by arrows on the packaging. In any case, the packaging must be protected from water.
Once the equipment has been unpacked the wheels must be mounted:
2 PASADORES ALETAS
2 ARANDELAS
PLANAS DE 20
The welding equipment location must satisfy the following requirements:
Place: Dry and ventilated, far enough away from the cutting area in order to prevent the metal dust caused
by the cutting process from getting into the equipment.
GALA MIG 255 M. Technical Instructions Manual
n 10
n 10 M10
M10
4 ARANDELAS PLANAS n 8
4 GROWERS M8
4 TORNILLOS M8
2 TORNILLOS M10
2 TORNILLOS M10
2 TORNILLOS M10
n 6
M6
M6
n 6
M6
M6
8 ARANDELAS PLANAS n 10
8 GROWERS M10
8 TUERCAS M10
16