Steren PAR-030 Manual De Instrucciones página 22

To synchronize the installation, you must select an
operation mode on the fi rst lamp with the UP and
DOWN buttons (except for SLAu, d001 or A001).
Doing this will establish the lamp as the MASTER
lamp which will control the others.
Operation
1. Once the connections are made and the
power cord is plugged, use the Menu button to
select an operation mode (see the chart below).
2. Use UP and DOWN buttons to adjust the
values of the selected mode.
8 8
Set the other lamps to slave mode (SLAu) and
they will all follow the same setting, so they will all
be synchronized to the same mode that you have
selected.