System Set Up And Considerations; Location; Setting System Address - IVAC Pro Guía Del Usario

5

System Set Up and considerations

5.1 Location

When mounting the 'iVAC Pro Tool Plus' and 'iVAC Pro
Switch' units they should NOT be mounted onto large metal
objects, since this can impact the operational range
between the units. Communications through walls may
impact the forty foot range.

5.2 Setting System Address

It should be noted that for 'Tool Plus' and 'iVAC Pro
Switch' units to work together they must be set to the same
System Address. Both the 'Tool Plus' and 'iVAC Pro Switch'
are shipped with the system address set at Address A. This
can be changed if there is a clash with an adjacent system or
if two systems are used in the same workshop.
The System Address is set by means of positions 1 and 2 on
the Program Switch.