Dust Collectors With Magnetic Switches - IVAC Pro Guía Del Usario

time. If the motor runs under normal conditions for a given
period it will cool itself down to a normal running temperature.
This mainly applies to dust collectors of 3HP and higher.
iVAC Pro Switches S11515-A-NA MRT can be obtained on
special order from BCTINT.
This iVAC Pro Switch enables the Minimum Run Time to be set
to 2, 4 or 8 minutes.

5.5 Dust Collectors with magnetic switches.

In some instances Dust Collectors are fitted with Magnetic
Switches. In these situations the iVAC Pro Switch or iVAC
Contactor should be installed between the dust collector switch
assembly and the motor. This should be performed by a
licensed electrician.