SIOUX SMR05S354 Instrucciones Y Lista De Piezas página 2

Poorly maintained and lubricated tools can fail unexpectedly.
Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool's information
sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and
transport it into the tool. See information sheet for any additional maintenance requirements.
Unexpected tool failures can cause injury.
Air hoses can come loose from power tools and whip.
Inspect and do not use tools with loose or damaged air hoses or fittings. Use lock pins and whipcheck safety cables when using
universal twist couplings.
Whipping air hoses can cause injury.
Abnormal sounding or excessively vibrating grinders can indicate a hazard that could cause wheel to explode.
If the normal sound of the grinder changes, or if it vibrates excessively, shut it off immediately, remove the wheel, and check
speed with tachometer. Tool could be overspeeding or the wheel could be damaged or not mounted properly.
Exploding wheels can cause injury or death.
Air hoses that are not oil resistant or are not rated for the working pressure can burst.
Make sure that all air hoses are oil resistant and rated for the working pressure.
Air hoses that burst can cause injury.
Tools not operated at proper air pressure can operate erratically.
Do not exceed a maximum air pressure of 90 psig/6.2 bar or as stated on the tool's nameplate or operating instructions. Use an
air regulator to maintain proper air pressure.
Erratic operation in power tools can cause injury.
Improperly repaired tools perform unpredictably.
Repair tools at an Authorized Sioux Service Center.
Tools that perform unpredictably can cause injury.
Tools left connected to the air supply can start unexpectedly.
Always remove tool from air supply and activate trigger to bleed air line before making any adjustments, changing accessories,
or doing any maintenance or service on tool. Make it a habit to check to see that all adjusting keys and wrenches have been
removed from tool before turning it on.
Tools starting unexpectedly and flying keys and wrenches can cause injury.
Working in poorly lit areas makes it hard to see hazards.
Keep work area well lit.
Poorly lit work areas can cause injury.
Children are attracted to work areas.
Keep children away. All visitors must keep a safe distance away from work area.
Children in work areas can be injured.
Unauthorized or untrained personnel can misuse unattended tools.
Store idle tools in a dry, high or locked-up place, out of the reach of children.
Misused tools can cause injury.
Tools with the actuator left in the "ON" position when an unexpected air pressure loss occurs can start unexpectedly when the air
pressure is restored.
Release the actuator if an unexpected loss of air pressure occurs.
Unexpected tool starts can cause injury.
Material removal tool with the actuator left in the "on" position can cause unexpected starts when the tool is connected to the air supply.
Be sure actuator is off before hooking up air.
Unexpected starts can cause injury.
Material removal tools may coast for a short time after the trigger is released.
Be sure tool has come to a complete stop before setting it aside.
Materail removal tools that do not come to a complete stop before setting aside can cause injury.
The use of any accessory with this tool not provided or specified by Sioux Tools can perform unpredictably.
Use only accessories provided or specified by Sioux Tools.
Tools that perform unpredictably can cause injury.
Modifications to the material removal tool can effect tool performance and safety.
Do not modify the material removal tool. Do not operate the material removal tool if it has been modified or damaged.
Periodically inspect grinder for damage and to ensure all safety markings are legible.
Damaged or modified material removal tools can cause injury.
Be aware of workplace hazards.
Be aware of slippery surfaces caused by the use of the material removal tool. Avoid trip hazards caused by the air line. Proceed
with care in unfamiliar surroundings.
Workplace hazards can cause injury.
High noise levels can cause hearing damage. Vibration exposure can cause disabling damage.
Use hearing protection. Damping the workpiece may help prevent ringing. Keep material removal tool maintained to prevent
an increase in noise and vibration. Replace the consumable to prevent and increase in noise and vibration. Ensure the muffler
is installed. Wear warm clothing when working on cold conditions. Keep your hands warm and dry. Do not allow the abrasive
wheel to chatter on workpiece. Support the material removal tool in a stand, tensioner, or balancer if possible. Do not hold the
material removal tool too tightly. Use blotters where they are provided with the bonded abrasive product.
High noise and vibration can cause injury.
When disposing of a tool, do it in a way that does not harm personnel or the environment.
Form ZCE848 2 Date 2020March27/A