Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for purchasing this Price Pfi ster kitchen faucet. All Price Pfi ster products are carefully engineered, and factory tested to provide long
trouble-free use under normal conditions. This kitchen faucet is easy to install using basic tools and our easy to follow illustrated instructions.
If you have any questions regarding your kitchen faucet installation call 1-800-Pfaucet (1-800-732-8238)
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price
Pfi ster recommends calling a professional if you are uncertain about installing
this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the faucet from the sink and clean the sink surface
thoroughly.
3
3 TOOLS RECOMMENDED
• Plumber's putty
• Slotted screwdriver
• Adjustable wrench
• Flashlight
Your installation may require new supply lines and / or shut-off valves or other
additional tools.
4
F
M
D
A
N
E
C
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are
included:
A Spout Body
B Valve Body
D Pull-Out Head
E Soap Dispenser
G Metal Washer
H Long Nut
K Locknut
L Weight & Clip
N Base Rings
If any of these items are missing, please contact Price Pfi ster Consumer
Services at 1-800-Pfaucet (1-800-732-8238).
ENGLISH
• Pliers
• Cloth
B
G
H
J
K
L
C Pull-Out Hose
F Soap Dispenser Head
J Washers
M Aerator Tool
2
INSTALLATION STEPS
5
5B
5E
5 SPOUT BODY INSTALLATION
Hold Base Ring (5A) to Spout Body (5B) and place Gasket (5C) under Base
Ring (5A). From above sink, insert Mounting Shank (5D) and Pull-Out Hose
(5E) through center hole of sink.
6
6C
6E
6 SECURING SPOUT BODY
From underneath the sink, place large Rubber Washer (6A), Lock Washer
(6B) and Locknut (6C) over Pull-Out Hose (6D). Thread loosely onto faucet
shank (6E). Align the faucet, making sure that the spout swing equally in both
directions. Tighten faucet fi rmly to sink.
.
5A
5D
5C
6E
6D
6A
6B
6C
Publicidad
Tabla de contenido
