Handle Installation - Black and Decker Price Pfister Portola RT6 Serie Guia De Inicio Rapido

10
10E
10B
10A
10C
10D
10 VALVE FLANGE INSTALLATION
Place Plastic Base (10A) and Flange (10B) over Valve Body (10C) covering the Valve
Body Washers (10D). Secure by threading the Plastic Nut (10E) onto the Valve Body
(10C).
11
11E
11D
11C
11A
11B

11 HANDLE INSTALLATION

Before proceeding, Valve Stems (11B) are to be set in the closed position.
Place Handle Hub (11A) onto Valve Stem (11B), connect Lever (11D) onto Handle Hub
(11A). Attach and secure with Screw (11C). Attach Decorative Button (11E).
10E
10B
10A
10C
10D
11E
11C
11D
11A
11B
ENGLISH
12
12A
12B
12C
12A
12B
12 HOSE GUIDE INSTALLATION
Insert Guide Holder (12A), Hose Guide (12B) and Washer (12C) into Decorative Hose
(12D). Remove Clip (12E) and Plaster Guard (12F) from Spray Hose (12G).
From underneath deck, slide Washer (12H) and Locknut (12J) into Spray Hose (12G) as
shown. Apply PTFE plumber's tape to threaded end of Decorative Hose (12D) according
to manufacturer's instructions. Attach Spray Hose (12G) to Decorative Hose (12D).
Connect Guide Holder (12A) onto Hose Guide (12B). Insert Hose Guide (12B) through
Washer (12C) and into Deck Hole. From underneath deck, secure Hose Guide (12B)
by screwing Locknut (12J). Be sure Guide Holder (12A) is centered and facing forward
before final tightening.
4
12D
12B
12C
12F
12E
12G
12H
12J