Bose Panaray 802 IV Serie Guia De Instalacion página 8

Installation
Mounting the 802
The 802 Series IV loudspeaker can be mounted on a speaker stand, such as the Bose
with thumb screws for attaching the speaker to the adapter on the top of the stand.
Note: Other stands have not been tested and may create a tipping hazard.
Figure 2. Panaray 802 Series IV loudspeaker on a Bose SS10 Speaker Stand
®
Bose SS10
Speaker Stand
Recommended Power Amplifiers
Selecting the proper amplifier size for a given loudspeaker requires analysis of the transducer long-term (or RMS) power
rating, dynamic range of the input-source material (crest factor), desired sound pressure levels, and other factors. As a
general guideline, the following table provides recommended power amplifier ranges for Bose Panaray
Model
802 Series IV
CAUTION: Failure to follow these guidelines may result in damage to the loudspeaker!
Please refer to the specifications listed on the pro.bose.com website for PowerMatch
table above to determine which PowerMatch model is best for your particular Panaray loudspeaker system design.
Recommended DSP Settings
The Bose Panaray 802 Series IV loudspeaker requires active equalization for optimal sound quality. The recommended
equalization is contained in the preset libraries of the Bose PowerMatch
engineered sound and loudspeaker processors.
8 - English
Series IV Loudspeaker on a Speaker Stand
®
Nominal Impedance
8 ohms
®
Required Channels
1
®
Configurable Power Amplifiers, ControlSpace
®
SS10 model. The SS10 comes
loudspeakers:
®
Amp Power Rating
250 – 500 Watts
amplifiers and compare with the
®