General Information; Characteristics; Operating Limits; Choosing The Installation Site - Olimpia splendid SHERPA MONOBLOC B0812 Manual De Instalación

Remote Controller
General information and characteristics
IMPORTANT:
Read the entire instruction manual before starting the
installation.
• For trouble-free installation, which should be carried out by a
• Follow all current national safety code requirements.
• After installation thoroughly test the system operation and
explain all system functions to the owner.
• Leave this manual with the owner for consultation during future
periodic maintenance.
• Dispose of packaging material in accordance with local
requirements.
• The manufacturer denies any responsibility and warranty shall
be void if these installation instructions are not observed.
• Inspect equipment for damage due to improper transportation
Do not install or use damaged units.
• In case of any malfunctioning turn the unit off, disconnect the
Models
Cooling only / heat pump

Operating limits

The remote control is designed for indoor applications in
residential and/or commercial environments.
the operator, without any special limits usually required for analo-
gue equipment with internal temperature sensors.
The operating limits are:
Choosing the installation site and installation
Mounting
WARNING:
GB - 4
30AW.
Wiring
• The remote controller must be connected to the 30AW unit.
Note that the remote controller requires no batteries.
The remote controller will not work without being connected to a
30AW unit.
Remote controller
Maximum operating temperature
Minimum operating temperature
Maximum storage temperature
Minimum storage temperature
Maximum operating relative humidity
Maximum storage relative humidity
Nominal power supply voltage
• Turn OFF all power to unit.
a
+50°C
+0°C
+70°C
-10°C
80% r.h.
95% r.h.
12 V ac (+/- 10%)
a
a